|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The tight smoke protection closure with the classification S200
for high pressures and a smoke temperature of 200 °C
Characteristics of the Fiberseal Evoultion-S200
- tested according to DIN EN 1643-3 resp. DIN 18095-3 with classification according to DIN EN 13501-2 of class S200 – max. leakage of 50m³/h of the complete system up to 200°C and at 50 Pa – and fire resistance test according to DIN EN 1634-1
- max. approved dimensions according to the AbP 7 m x 4,5 m
- technically feasible are dimensions of 10 m x 6 m (for demand EW90 10 m x 5 m)
- cycle test according to class C2 = 10.000 cycles
- elastic floor sealing to seal bigger unevenesses (eg to 30 mm within 1 m)
- versatile mounting options
- passive sealing system for closing, so that no compressors and wear parts are necessary. By this also the possibility of using it as a fire protection closure is given, as no sealing parts are combustible
- additional protection targets through special fabrics for fire resistance classes of E 120 and also up to EW 90
- high quality fabric with silicone coating, optionally with PU coating
- patented tubular motor drive system with Gravigen technology
- integrated safety edge as an option
| Fabric |
System width |
Drop length |
t
(mm) |
h
(mm) |
Fabric
|
| Protex 600 S / Ecotex 1100 2S |
< 10 m |
≤ 6 m |
350
|
260 |
Standard |
| Protex 600 S / Ecotex 1100 2S |
< 5 m |
≤ 4,5 m |
285
|
200 |
Special |
| Protex 600 S / Ecotex 1100 2S |
< 3,5 m |
≤ 3,5 m |
190
|
290
|
Special |
| Protex 600 S / Ecotex 1100 2S |
< 7 m |
≤ 5 m |
290 |
360 |
Special |
| Heliotex |
< 7 m |
≤ 3,5 m |
350
|
260 |
Standard |
| Heliotex |
< 5 m |
≤ 2,5 m |
285
|
200 |
Special |
| Heliotex |
< 3,5 m |
≤ 2 m |
190
|
290
|
Special |
| Heliotex |
< 6 m |
≤ 3 m |
290
|
360 |
Special |
Casing 285 x 200 only for ceiling mounting
|
 |
|
|
|
|
Standard casing Special casing
|
Choice of casings
|
|
|
|
|
|
Standard casing
|
|
Special casing
|
|
|
Bottom bars
|
|
|
|
|
|
|
|
|
|
Standard
|
|
With safety edge
|
|
|
|
|
|
|
Installation of the side guides
|
|
|
|
|
|
Installation to the wall
|
|
Installation in the embrasure
|
|
Installation in the niche
|
Installation options
|
|
|
|
|
|
Installation of the casing to the wall
|
|
Installation of the casing to the wall; false ceiling is unilaterally connected to the casing
|
|
Installation of the casing directly to the ceiling
|
|
|
|
|
|
|
Installation of the casing directly to the ceiling, false ceiling is connected to the casing on both sides
|
|
Installation of the casing over a suspension to the ceiling
|
|
Installation of the casing over a suspension to the ceiling
false ceiling is connected to the casing on both sides, without fire protection
|
Protection targets
Smoke protection closure tested according to DIN EN 1634-1/3, classified according to DIN EN 13501-2
| Protection target |
No requirements for fire protection |
Requirement up to E 120
(integrity) |
Requirement up to EW 90
(limitation of heat transmission) |
Requirement up to EI 120
(characteristic: Insulation/with water) |
S200 tested according to
DIN EN 1634-3 |
|
|
|
|
 |
Max. dimensions according to AbP / limitated by the standard
(w x h) |
7 m x 4,5 m max 31,5 m² |
Max. dimensions according to AbP / limitated by the standard
(w x h) |
7 m x 4,5 m
max 29,4 m²
|
Max. dimensions according to AbP / limitated by the standard
(w x h) |
7 m x 4,5 m
max 29,4 m² |
Max. dimensions according to AbP / limitated by the standard
(w x h) |
7 m x 4,5 m
max 29,4 m² |
| Technically feasible per side |
10 m x 6 m |
Technically feasible per side |
10 m x 6 m * |
Technically feasible per side |
10 m x 5 m * |
Technically feasible per side |
10 m x 6 m * |
| Fabric |
Protex 600 S |
Fabric |
Ecotex
1100 2S
|
Fabric EW 30
Fabric EW 90
|
Ecotex 1100 2S
Heliotex |
Fabric |
Ecotex
1100 2S |
| Certificate |
AbP: P-3359/
128/08
MPA Braun-
schweig |
Certificate |
Test reports: P-3286-
0926
MPA Braun-
schweig,
UB III/B-06-15 (E 120) |
Certificate |
Test reports:
P-3286-0926
MPA Braunschweig,
UB III/B-08-012 (EW 90)
UB III/B-06-15 (EW 30)
|
Certificate |
Test reports:
P-3286-
0926
MPA Braun-
schweig,
UB III/B-08-016 (EI 120)
|
*) Limitations through country-specific extrapolations are possible.
|
|
|
|
|
|
